My corrugated metal fence update- the fence is now in it’s 3rd year and I like the way it’s aging over time. The patina of the corrugated steel darkens and changes bit by bit every day and I’m enjoying watching the weathering process.
The two wide gates to the side yard are so heavy and awkward to move, we needed a solution to high daily foot traffic without having to leave the gate(s) constantly open and sagging (due to the slope in the driveway) and also a solution without the wear and tear of constantly being pushed and shoved opened and closed. So we came up with the Euro-gate solution. I’ve seen many large gates with a tiny door for daily passage all over Europe and decide this was the answer to our problem. It works well with the patchwork look of the fence. My plan is to weld a rectangle tiny door to fit the opening that would essentially be invisible when it was closed. Since we don’t have any animals to keep in right now, the tiny door has fallen to the bottom of my list of things-to-do. Soon though.
The view of the gate from the backyard, looking through the side yard to the back of the gate. I put this pathway in in the spring and the ‘stepable’ plants we put in the cracks are filling in nicely. That process- building the flagstone pathway- in another post coming soon. The shipping container will also have French doors where the flagstones come up like a patio area.
The inside view of the gates. After getting ripped apart in a microburst in their first year, I rebuilt and reinforced the gate panels with these metal beams based on a suggestion of a very wise friend. The gates are so much more stable now and not likely to sag or get blown away. Another key element to restricting movement of these gates, that act like sails in the wind, are the pins going down into the concrete that hold the gates in place in the center. Absolutely essential.
Rust details on the front side of the fence. This is 3 years worth of rust. This part of the fence isn’t hit by a sprinkler but it does get pelted every time it rains which explains why the rust is more pronounced at the bottom of each panel.
The garden side of the house and much smaller gate. As you can see the areas that are hit by the sprinkler or rain, are much rustier than the panels closer to the house. This gate was much easier to build, open and close and maintain. I never intended to leave to 2×4 across the top of the gate area, but the post on the right side of the gate is twisting and warping, and it became necessary to leave it to slow the unfortunate movement of the 4×4 post and hold things square.
The back three sides of the fence around the yard are straight corrugated metal. It is aging comfortably with a beautiful patina. I love all looks and every stage. We finally got the pergola put in in early spring. It was a kit that we had to paint ourselves and piece together lego style. Once the footings were installed, a process I find stressful, it was an overall easy project. I carried over the flagstone look to this side of the yard also.
We found this outdoor seating on KSl classifieds, a local market for used everything, for a great price and had some wonderful summer moments and parties under the pergola in our newest ‘room’.
Note: When we were digging the trenches for the sprinkler system, we laid electrical line alongside the pipes and ran wiring to the pergola area for easy, invisible electricity.
The shipping container is next. We found some perfectly good, durable doors and windows at Habitat for Humanity in Park City that had been pulled out of another house, I’m assuming for a remodel, that are all ready to be installed when the time comes- hopefully soon!
For a look at the making of this corrugated metal fence DIY in 2013 click here.
For a look at the fence after 1 year in 2014 look here.
For a look at the fence in 2018 look here.